At Jordan Innovations, we recognize the need for high quality heim joints at affordable prices – whether you have quality, name-brand arms and just need some replacement bushigns, or want to save hundreds of dollars by using a cheaper set of arms with our joints, we’ve got you covered! We keep most common metric sized male heim joints (spherical ball bearings/bushings) in stock, as well as misalignment bushings (commonly referred to as “spacers”) and locking hardware!
If you’ve purchased a set of suspension arms from Ebay, Megan Racing, Godspeed, Circuit Sports, or any number of other “cheap”, “knock-off” sources, chances are you’ve got thin-walled tubing, connected by welds that are barely passable, holding the cheapest heim joints available – but don’t worry! Because the suspension arms aren’t subject to much off-axis loading, you can get very similar performance to “name-brand” arms by simply replacing the heims with our units!
The specs of each heim vary with sizing, but every single one is top quality, built to the same specs as Aurora/QA1/FK/etc – directly comparable to the heims from those top manufacturers, for a fraction of the price! Unlike the heims that come in “knock-off” suspension arm kits, ours are chrome or zinc plated so they’ll never rust, have hard chrome balls so they’ll never get pitted (which eats away the bearing race, leading to advanced wear), have Teflon races so they’re mainenance free! Never worry about greasing a Zerk fitting! We also include chrome lock nuts and lock washers, and can include Seals-it rod end boots to make sure the heim stays clean in any environment.
Check back here for inventory updates, or shoot us an email for a quote!
Suspension@JordanInnovations.com
To see my running Group Buy on these heims at Zilvia.net, click here:
http://zilvia.net/f/group-buys/252371-top-quality-heim-joints-boots-get-em-while-theyre-hot.html
